Furnace Troubleshooting Common Issues And Easy And Effective Solutions
With proper furnace repair Los Alamitos and maintenance, furnaces can be more efficient and give you value for your money. However, there is a time when they inevitably will start to break down and develop issues that impede efficient functioning. If you realize that your furnace is acting up or not turning on, you should go over the following troubleshooting tips.
Check the filter
The
first thing you need to check is the filter. With time, the filters will become
dirty. Dust and dirt can clog the filter of your furnace and this impedes
airflow. It also worsens your indoor air quality. Dirty filters can even
prevent your furnace from turning on. It can become a fire hazard and premature
breakdowns due to dirt and dust.
Check the thermostat
Check
the thermostat after verifying your filter is installed properly and clean. Do
this before calling a furnace repair specialist. You need
to ensure your thermostat is set to heat and set the temperature at 5 degrees
higher than your room temperature. If the batteries are dead, replace them.
Check the furnace switch
Sometimes,
the thermostat and filter are fine but the power could be the problem. You
should check the switch. Someone may have accidentally turned the switch off.
You should try flipping it back. If this does not work then you will need to
head to the electrical panel. You should ensure power is turned on at the fuse
box or breaker box. If the breaker box is labeled properly, you should ensure
the HVAC breaker is turned on.
Check the furnace flame
Before
spending money on furnace repair Los Alamitos, you should ensure the furnace
flame is blue with a small yellowish tip. A blue flame indicates that the gas
furnace is burning efficiently and safely. If the flame of the furnace is red,
purple, green, yellow or any other color other than blue then you should
contact a professional.
Comments
Post a Comment